Low pressure regulators

The regulators of the low pressure series are available in several different configurations and connection sizes. Beside the meter service governor there are also in line and coaxial type regulators available. A low pressure cut-off is optional. Alternative the regulators can be fitted with an excess flow cut-off. The regulators are fire safe and DVGW approved according to VP200.
60DJ, 80DJ & 150DJ
Appliance and pilot gas regulator 1/4'', 3/8'' & 1/2''. Inlet pressure up to 350 mbarmore

 
J42
Low pressure meter service regulator for use in domestic installationsmore

 
J78
Gas regulator 1/2'', 3/4'', 1''. Inlet pressure up to 350 mbarmore

 
J48 (up to 2 inch size)
Outlet pressures from 2" W.C. up to 64" W.C. Operating temperature range is -4°F to +158°F (-20°C to + 70°C) with a maximum allowable pressure of 5 PSIG (350 mbar). Flow rates up to 28040 SCFH (800 SCMH).more

 
J48 (2 up to 6 inch size)
Outlet pressures from 2" W.C. up to 64" W.C. Operating temperature range is -4°F to +158°F (-20°C to + 70°C) with a maximum allowable pressure of 5 PSIG (350 mbar). Flow rates up to 28040 SCFH (800 SCMH).more

 
J90
Gas Regulator 1 1/4'', 2'' & 3''. Inlet pressure up to 350 mbarmore

 
NDAF
Series of co-axial service regulators for use with several smaller unitsmore

 
HR
Service regulators for use with several meters in different consumption unitsmore

 
ZRH
Series ZRH of meter service governors for use with high-performance two-pipe gas metersmore